Hardware Specifications - Renesas QB-78K0FX2L User Manual

QB-78K0FX2L In-Circuit Emulator

1.1 Hardware Specifications

Parameter
Target device
Operating voltage
Operating
High-speed system clock
frequency
Internal high-speed
oscillation clock
Internal low-speed
oscillation clock
Operating temperature range
Storage temperature range
External dimensions
Power
Target system power supply
consumption
Weight
Host interface
Note1 Error of the clock generated in the emulator is ±0.5%. However, this does not apply to error of
the oscillator or clock system on the target board.
Note2 You can use only when the PLL is 4MHz.
Note3 The actual device characteristics will be from 27 to 33kHz.
R20UT2057EJ0100 Rev.1.00
2012.05.18
Table 1-1. QB-78K0FX2L Hardware Specifications
78K0/FY2-L, 78K0/FA2-L, 78K0/FB2-L
1.8 to 5.5V
2.7 V  V
Note1
2.7 V  V
Note1
1.8 V  V
0 to 40°C (No condensation)
−15 to 60°C (No condensation)
See figure below
Voltage: 1.8 to 5.5 V
Current: about 3mA MAX
Approx. 300 g
USB interface (1.1, 2.0)
Specification
 5.5 V :1 to 10 MHz
Note2
DD
 5.5V :1, 2, 4, 8 MHz
Note2
DD
 5.5V :31.25kHz
Note3
DD
CHAPTER 1 GENERAL
Page 8 of 37