Hardware Specifications - Renesas QB-RL78L12 User Manual

QB-RL78L12 In-Circuit Emulator

1.1 Hardware Specifications

Target device
Operating voltage
Operating
frequency
Operating temperature range
Storage temperature range
External dimensions
Power
consumption
Weight
Host interface
Note1 Errors are within ±0.05%. However, this does not apply to errors of the oscillator or clock system
on the target board.
Note2 Errors are within ±0.005%. However, this does not apply to errors of the oscillator or clock
system on the target board.
Notes 1. Does not include projection of power switch
2. Includes projection of screw that fixes rear space adapter
3. Rear space adapter can adjust the height from 30 mm (longest) to 0 mm (shortest)
4. Front space adapter can adjust the height from 20 mm (longest) to 5 mm (shortest)
R20UT2080EJ0100 Rev.1.00
2013.03.18
Table 1-1. QB-RL78L12 Hardware Specifications
Parameter
Main High-speed
system system clock
clock
Note1
High-speed
on-chip oscillator clock
Low-speed system clock
Note1
Subsystem clock
Note2
Target system power supply
Note1
112mm
Specification
RL78/L12
1.6 to 5.5V
2.7 V  V  5.5 V : 1 to 20 MHz
DD
1.8 V  V  2.7 V : 1 to 8 MHz
DD
1.6 V  V  2.7 V : 1 to 4 MHz
DD
1.6V V  V  5.5V : 1 to 24 MHz
DD
1.6 V  V  5.5 V : 15 kHz
DD
1.6 V  V  5.5 V : 32.768 kHz
DD
0 to 40°C (No condensation)
−15 to 60°C (No condensation)
See figure below
Voltage: 1.6 to 5.5 V
Current: approx. 250 mA MAX
Approx. 400 g
USB interface (1.1, 2.0)
Note2
108mm
58mm
Front space
Note3
adapter
Rear space
CHAPTER 1 GENERAL
Note4
adapter
Page 8 of 42