Connecting The Pc7501 - Renesas M3028BT-EPB User Manual

M3028BT-EPB User's Manual

2.4 Connecting the PC7501

Figure 2.3 shows how to connect the PC7501 and the emulation probe.
Figure 2.3 Connecting the PC7501 and emulation probe
Notes on Connecting the PC7501:
When connecting the emulation probe, be sure to hold the both sides of the emulation probe horizontally and
insert it directly.
Always shut OFF power before connecting the emulation probe. Otherwise, internal circuits may be damaged.
Note on Connectors of the Converter board:
The connectors of the emulation probe are guaranteed for only 50 insertion/removal iterations.
REJ10J1459-0200 Rev.2.00 Sep 16, 2006
M3T-FLX160-EPB
Emulation probe
CAUTION
IMPORTANT
2. Setup
Page 23 of 86