Connecting The Pc7501 - Renesas Emulation Probe M30850T-EPB User Manual

3.7 Connecting the PC7501

Figure 3.9 shows how to connect the PC7501 and the emulation probe.
Figure 3.9 Connecting the PC7501 and emulation probe
Note on Connecting the Cable:
Note: Connect the PCA7501EPBA board side to the M3T-FLX160-EPB.
• When connecting the emulation probe, be sure to hold the both sides of the emulation
probe horizontally and insert it directly.
• Connect the PCA7501EPBA board to the M3T-FLX160-EPB.
• Always shut OFF power before connecting the emulation probe. Otherwise, internal
circuits may be damaged.
CAUTION
( 36 / 76 )
M3T-FLX160-EPB
M30850T-EPB