Connecting The Pc7501 - Renesas R0E3308B0EPB00 User Manual

R0E3308B0EPB00 User's Manual

2.4 Connecting the PC7501

Figure 2.3 shows how to connect the PC7501 and the emulation probe.
Figure 2.3 Connecting the PC7501 and emulation probe
Cautions for Connecting the PC7501:
• When connecting the emulation probe, be sure to hold the both sides of the emulation probe horizontally and
insert it directly.
• Connect the PCA7501EPBA board to the M3T-FLX160-EPB.
• Always shut OFF power before connecting the emulation probe. Otherwise, internal circuits may be damaged.
• Make sure that the frequency of the oscillator circuit board mounted on the PC7501 is 16 MHz or less. If the
PC7501 comes with an oscillator circuit board OSC-3 (30 MHz), replace it with the oscillator circuit board
OSC-3 (16 MHz) included in this product.
R20UT0210EJ0200 Rev.2.00
Sep 16, 2010
Note: Connect the PCA7501EPBA board side to the M3T-FLX160-EPB.
M3T-FLX160-EPB
R0E3308B0EPB00
CAUTION
2. Setup
Page 23 of 98