Restoring A User Set Between Different Firmware Versions - ABB ACL30 User Manual

116 Using the control panel


Restoring a user set between different firmware versions

If you try to backup and restore a user set between different firmware versions, the
panel shows you the following alarm information:
Step Action
1. Restore operation starts normally.
2. Version check is also OK.
You can see on the panel that the firmware
versions are not the same.
You can scroll the text with keys
.
3. If the downloading is continued, the display shows
a message about it.
• Downloading continues, drive is restarted.
• The display shows the transfer status as a
percentage of completion.
• Downloading continues.
LOC
Initializing param.
restore operation
LOC
FIRMWARE VERSION
UMFL, 1460, 0,
UMFL, 1330, 0,
and
PRODUCT VARIANT
CANCEL
LOC
Initializing param.
restore operation
LOC
Restarting drive
LOC
Restoring/downloading
user set 1
LOC
Initializing param.
restore operation
Display
PAR BACKUP
00:00
VER CHECK
OK
00:00
CONT
PAR BACKUP
00:00
PAR BACKUP
00:00
PAR BACKUP
50%
PAR BACKUP
00:00
1