Configuration Restore & Backup - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Source File
Click the Backup button to initiate the firmware backup.
Firmware Backup to TFTP
This window is used to initiate a firmware backup to a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown
below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source File
Destination File
Click the Backup button to initiate the firmware backup.
Configuration Restore & Backup
Configuration Restore from HTTP
This window is used to initiate a configuration restore from a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP,
as shown below:
Description
Select the firmware on the Switch that will be backed up to the local PC here.
Options to choose from are Image 1 and Image 2.
Figure 13-5 Firmware Backup to TFTP Window
Description
Select and enter the IP address of the TFTP server here.
• IPv4 - Specifies to select and enter the IPv4 address of the TFTP server.
• IPv6 - Specifies to select and enter the IPv6 address of the TFTP server.
Select the firmware file on the Switch that will be backed up to the TFTP server
here. Options to choose from are Image 1 and Image 2.
Enter the filename and path of the firmware file that will be stored on the TFTP
server here. This field can be up to 64 characters long.
Figure 13-6 Configuration Restore from HTTP Window
244