Table of Contents
Advertisement
Playing with Quick Sampling
Loading a Sample from a USB
Flash Drive
IMPORTANT
• If the instrument is in the Quick Sampling mode, press the
[QUICK SAMPLING] button to exit from the mode, and then
follow the steps below.
NOTICE
• The loading operation will overwrite and erase previously
existing samples. Save important data you want to keep to
a USB flash drive (page 35).
1
Connect a USB flash drive to the [USB
TO DEVICE] terminal.
For details, refer to "Connecting a USB Flash
Drive" on page 72.
2
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
To cancel the operation, press the [FUNCTION]
button again to exit from the File Control display.
3
Use the CATEGORY [<<] and [>>] but-
tons to call up "LoadSMPL."
LoadSMPL
4
Press the [0/EXECUTE] button.
"PressKey" appears on the display.
5
Press the appropriate key in the Sample
Zone to which you want to assign the
sample.
6
Use the [+/YES] and [-/NO] buttons to
select the file name to load.
You cannot select a sample that loops
(SMPLL001–SMPLL250) for assigning to Sample
Zone A.
7
Press the [0/EXECUTE] button.
"LoadOK?" appears on the display.
8
Press the [0/EXECUTE] or [+/YES] button
again.
"Loading" appears on the display and the sample
will be loaded from the USB flash drive.
9
Press the [FUNCTION] button to exit
from the File Control display.
36
PSR-I500 Owner's Manual
10
Try playing with the loaded samples.
Press the [VOICE] button and select the Voice
number 802 "Smpl Vce" for the Main Voice.
Pressing the appropriate key in the Sample Zone
(to which you assigned the sample) to play the
sound.
Deleting a Sample in the USB
Flash Drive
IMPORTANT
• If the instrument is in the Quick Sampling mode, press the
[QUICK SAMPLING] button to exit from the mode, and then
follow the steps below.
1
Connect a USB flash drive to the [USB
TO DEVICE] terminal.
For details, refer to "Connecting a USB Flash
Drive" on page 72.
2
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
To cancel the operation, press the [FUNCTION]
button again to exit from the File Control display.
3
Use the CATEGORY [<<] and [>>] but-
tons to call up "Del SMPL."
Del SMPL
4
Press the [0/EXECUTE] button.
5
Use the [+/YES] and [-/NO] buttons to
select the file name to delete.
6
Press the [0/EXECUTE] button.
"Del OK?" appears on the display.
7
Press the [0/EXECUTE] or [+/YES] button
again.
"Deleting" appears on the display and the sample
is deleted from the USB flash drive.
8
Press the [FUNCTION] button to exit
from the File Control display.
If the instrument is in the File Control display, no
sound comes out even if you press the keyboard.
Advertisement
Table of Contents
