Connecting To An Ibm-Pc/At Series Computer - Yamaha Clavinova CLP-880 Owner's Manual

M,br.::;lr~M~c
UD
I
Set to the "PC-2"
position.
or
HOSTSELEOT TO HOST
co
o cc
oc
IBM-PC/AT
Series Computer
Connecting to a Personal Con1puter
D
Connecting to an IBM-PC/AT Series Computer ............
Connect the TO HOST connector of the Clavinova to the RS-232C port
on your IBM computer, using a standard 8-pin MINI DIN
--7
9-pin D-SUB
cross cable. Set the HOST SELECT switch to the "PC-2" position.
Refer to your software owner's manual for information on any
settings you might have to make on the computer side.
• "PC-2" Cable Connections
Ell
MINI DIN
8-PIN
om
10 - - - - - - - - - - < O S ( C T S )
D·SUB
20 - - - - - - - - - - - < 0 7 (RST)
9-PIN
30 >------~------<O
2
(RxO)
o - - . . . - - - - - - - - - { ) 5 (GNO)
o
- - - - - - - - - - - < 0
• 8-pin mini DIN
~
9-pin D-SUB cable.
• Data transfer rate: 38,400 bps.
~
NOTE
l .
If
your system doesn't work properly with the connections and settings listed above, your software may require
different settings. Check your software operation manual and if
it
requires a 31,250 bps. data transfer rate, set the
HOST SELECT switch to "PC-1 ".
• When using the TO HOST terminal to connect to a personal computer using Windows, a Yamaha MIDI driver must
be installed in the personal computer. The Yamaha MIDI driver can be obtained at Yamaha's home page on the
World Wide Web, <http://www.yamaha.co.jp/englishlxg/>.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - '
• Connector Pin Numbers
MINI DIN 8-PIN
0
78
34 5
1 2
D-SUB 9-PIN
• Trademarks
• Apple and Macintosh are trademarks of Apple Computer, Inc.
• IBM-PC/AT is a trademark of International Business Machines Corporation.
• Windows is the registered trademark of Microsoft® Corporation.
All other trademarks are the property of their respective holders.