Table of Contents
Advertisement
Appendix
■ Messages
A/B POINTS NOT FOUND
BULK: BYTE COUNT MISMATCH!
BULK: CHECK SUM MISMATCH!
BULK: MEMORY PROTECTED!
CANNOT REDO
CANNOT SET MARK
CANNOT UNDO
CD PLAY MODE NOW
CH. PARAMETER INITIALIZED
DIFFERENT TC FRAME TYPE
DIGITAL-ST-IN REC PROHIBIT.
DISK BUSY!!
DISK FULL!!
IN/OUT POINTS NOT FOUND
IN/OUT POINTS TOO CLOSE
LOCATE POINT ERASED
LOCATE POINT SET
MARK POINT ERASED
MARK POINT SET
MEMORY FULL!!
MIDI BULK RECEIVED
MIDI IN: DATA FRAMING ERROR!
MIDI IN: DATA OVERRUN!
MIDI: RX BUFFER FULL!
MIDI: TX BUFFER FULL!
MTC SLAVE MODE NOW
NO MARK LEFT
NO MEDIA!!
RECORDER BUSY
RECORDER RUNNING
RECORD TRACK NOT SELECTED
REDO COMPLETE
REPEAT POINTS TOO CLOSE
SOUND CLIP MODE NOW
STEREO TRACK PLAYBACK MODE
SYSTEM ERROR!!
THIS SONG IS PROTECTED.
TOO MANY REGIONS!
TRIGGER LIST RECORDING
UNDO COMPLETE
WRONG WORD CLOCK!!
198
Display message list
Repeat Playback cannot be performed because A/B points are not specified.
The data length specified within the received system exclusive data did not
match the length of the data that was actually received.
The check sum of the received system exclusive is incorrect.
The scene memory you attempted to receive is protected.
Redo (re-execution of an operation) is not possible.
It is not possible to specify a mark at an already-specified position.
Undo (cancellation of an operation) is not possible.
Since the AW16G is in CD Play mode, this operation is not possible.
The mixer parameters of the channel have been initialized.
MTC of a different frame type than the internal setting is being received.
Recording is prohibited for the signal being input from DIGITAL STEREO IN.
The reading speed of the internal hard disk is not fast enough, or the reading
speed has slowed down because the recorded data has become fragmented.
There is insufficient space on the internal hard disk.
Auto-punch recording cannot be performed because in/out points are not speci-
fied.
The auto punch-in/out interval is too short. It cannot be set less than approxi-
mately 100 msec.
The locate point has been erased.
The locate point has been set.
The mark has been erased.
The mark has been set.
The song has no more free space. One song can use a maximum of 6.4 GB.
A bulk data dump was received.
Invalid data may have been received at the MIDI IN connector.
Invalid data may have been received at the MIDI IN connector.
Receiving more MIDI data than it can handle.
Attempting to transmit more MIDI data than it can handle.
This operation cannot be performed because the AW16G is in MTC Slave mode.
The allowable number of marks has been exceeded.
Media has not been inserted.
The operation cannot be executed because the recorder is operating.
The operation cannot be executed because the recorder is recording or playing.
Recording cannot be performed because you have not selected a record track.
Redo (re-execution of the previous operation) has been completed.
The repeat interval is too short. It cannot be set to less than one second.
Since you are in Sound Clip mode, this operation cannot be executed.
Since you are in Stereo Track Playback mode, this operation cannot be executed.
An internal system error has occurred.
This song is protected, and cannot be edited or recorded.
There are too many recorded regions.
A sampling pad trigger list is being recorded.
Undo (cancellation of the previous operation) has been executed.
An inappropriate word clock is being received from the connected device to
which you are synchronizing.
Advertisement
Table of Contents
