Changing An Access Level - Yamaha SRCP User Manual

Memory card
Level
0
All operations are permitted.
Loading the parameters and all data to the SRCP is prohibited.
1
(Point data or program data can be loaded.)
Loading any data to the SRCP is prohibited.
2
(Data can be saved and the memory card formatted.)
Use of memory card is prohibited.
3
(Cannot enter SYS-B.UP mode.)

4-5-2 Changing an access level

1) Press (SYS) on the initial screen.
F3
2) Press (next) to switch the menu display
F4
and then press (SAFE).
F1
3) When the password entry screen appears, enter
the password and press
4) When the password is accepted, the screen
shown on the right appears.
Press (ACLV) here.
F1
4-5 Restricting Key Operation by Access Level
Description
.
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1SAFE2OPT 3UTL 4next
[SYS-SAFE]
Password: 24.00_
input password
[SYS-SAFE]
select menu
1ACLV2SVCE
4
9
4-