Installation/Uninstallation - Siemens SITOP UPS1600 Manual

Engineering and remote access
3.5 SITOP UPS Manager
Use the tab
The language selection
Manager. The German, English, French, Italian, Spanish, and Chinese languages are
available.
The functions of the save bar
SITOP UPS1600 and open or save the configurations on a data medium.
The colored representations of the connection lamps
and outgoing connection. Both lamps must light green.
Left-hand connection lamp: Connection status SITOP UPS Manager application - SITOP
UPS Manager service
Right-hand connection lamp: Connection status SITOP UPS Manager service - SITOP
UPS1600
3.5.4

Installation/uninstallation

The installation file for the SITOP UPS Manager is available at no charge on the SITOP
home page (http://www.siemens.com/sitop-ups1600) or directly
(https://support.industry.siemens.com/cs/ww/en/view/75854607).
Operational requirements
Operating systems
The Windows XP and Windows 7 (32 bit and 64 bit) operating systems are supported.
Ethernet or USB interface
To install and use the SITOP UPS Manager in conjunction with the SITOP UPS1600, the
computer must be connected with the SITOP UPS1600 via Ethernet or USB port.
Windows user group
Users of the SITOP UPS Manager must be members of the Windows user group "power
users".
Installation preconditions
Administration rights
You require administrator rights to install the SITOP UPS Manager.
92
①
to reach the individual submenus.
②
is used to select the user interface language of the SITOP UPS
③
are used to load the configuration into or from the
④
indicate the status of the incoming
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76