Siemens SITOP UPS1600 Manual page 29

LED 4 (battery/BAT.Fault)
Signaling
Off
Flashing yellow
(0.5/0.5)
Red
Yellow
LED 5 and LED 6 (PROFINET LEDs)
Signaling
LED 5 (SF)
Off
Off
Off
Red
Flashing red (0,1/0,1)
Flashing red (0.5/0.5)
Flashing red (0.5/0.5)
Flashing red (0.5/0.5)
LEDs 5 and 6 are active only for ... -2AY0.
LED 7 (Ethernet LED / P2)
Signaling
Off
Green
Green/orange alternately
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
6EP4134-3AB00- ...
6EP4136-3AB00- ...
6EP4137-3AB00- ...
Battery O.K. or uncoded battery modules connected or buffer time rotary coding switch at
position MAX
Battery outside the permitted temperature range
Battery defective
Selected buffer time cannot be attained
LED 6 (RUN)
Off
Flashing green
(0.5/0.5)
Green
Green
Green
Flashing green
(0.5/0.5)
Off
Flashing green
(0.5/0.5)
6EP4134-3AB00-2AY0
6EP4136-3AB00-2AY0
6EP4137-3AB00-2AY0
Device not connected with controller
Device connected with controller, no activity
Device connected with controller, send/receive data (RX/TX)
Description, device design, dimension drawing
2.4 Operating displays and signaling
6EP4134-3AB00-2AY0
6EP4136-3AB00-2AY0
6EP4137-3AB00-2AY0
No connection to a PROFINET IO controller
Configuration by the PROFINET IO controller
Application started successfully, module O.K.
Application started successfully, module not O.K.
Application in progress, diagnosis can be called
Self-test running (flashing alternately every 3 s)
DCP requires device identification (LED flashes for
3 seconds)
Firmware update
29