Sitop Ups1100 - Siemens SITOP UPS1600 Manual

Description, device design, dimension drawing
2.1 Device description
2.1.2

SITOP UPS1100

The SITOP UPS1100 battery modules consist of a battery holder with two maintenance-free,
closed lead or LiFePO batteries with terminals for the connection cables to the
SITOP UPS1600 uninterruptible power supply. The UPS1100 contains a printed-circuit
board for monitoring the battery functions and the communication with the SITOP UPS1600.
A green LED lights continually to indicate that there is a communication connection to the
SITOP UPS1600. The LED flashes when the batteries are being replaced or for faults and
alarms.
Up to 6 SITOP UPS1100 of the same type can be connected in parallel with a
SITOP UPS1600.
When replacing a battery, see Chapter Battery replacement (Page 153).
①
②
③
④
⑤
⑥
⑦
Image 2-2
Note
For the UPS1100, clearance is required above it in order to open the cover. Clearance below
is not required for thermal reasons - however, space is required to feed in the cable.
16
DC input X1
Signal terminal X2
Fuses F1/F2 (F2 only for 7 Ah and 12 Ah)
Signaling (LED)
Mounting rail holder (not for the 7 Ah and 12 Ah versions)
Natural convection
Clearance above
SITOP UPS1100 design (example 6EP4133-0GB00-0AY0)
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76