Siemens SITOP UPS1600 Manual page 108

Engineering and remote access
3.5 SITOP UPS Manager
● Load current
● Ready for buffering
Energy storage data and parameters
1. Select "Display > Operating data".
2. The data and parameters of the energy storage device can be found under "Energy
storage".
The following data are displayed:
● Order number
● Serial number
● SW version
The following parameters are displayed:
● Battery capacity
● Battery charge level
● Battery temperature
● Measured charge current
Trend charts
You have the possibility of graphically displaying values about the power supply under
"Display> Trend chart", for instance the load current over time:
108
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76