Siemens SITOP UPS1600 Manual page 79

1. Unpack the ZIP file into a temporary directory.
2. Open the "Accessible nodes" window with the "Target system > Display accessible
nodes" menu command.
Note
For an online connection via the "Accessible nodes" window, PG/PC and "Accessible
nodes" must be connected to the same physical Ethernet subnet.
3. Select the "Target system > Update firmware" menu command.
4. Select the SITOP UPS1600 whose firmware is to be updated.
5. In the open "Update firmware" dialog, press the "Browse" button to select the path to the
directory with the unzipped files.
In this directory, select the "ups10a.upd", "ups20a.upd", "ups40a.upd" files.
6. After you have selected a file, the information in the bottom fields of the "Update
firmware" dialog box indicate the components for which the file is suitable and from which
firmware version.
7. Click the "Run" button.
8. STEP 7 verifies that the selected file can be interpreted by the module and then
downloads the file to the module.
9. If this requires changing the operating state of the IO controller, then you will be prompted
to do this in the relevant dialog boxes.
10.The module then automatically updates the firmware.
Note
A separate connection is established to the CPU for the firmware update, if available. In
this case, the task can be interrupted. If no resources are available for another
connection, an existing connection will be used automatically. In this case, the task
cannot be interrupted; the "Cancel" button in the transfer dialog is grayed-out and cannot
be operated.
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
Engineering and remote access
3.4 SIMATIC STEP 7
79