Engineering And Remote Access; General - Siemens SITOP UPS1600 Manual

Engineering and remote access

3.1

General

This section describes the software tools offered by Siemens that are compatible with
SITOP UPS1600 . The software tools are introduced with their functions, the associated
requirements and the operation. The software products are:
● SIMATIC STEP 7 in the TIA Portal
● SIMATIC STEP 7
● SITOP UPS Manager
● Web server
Functions of the individual software products
● SIMATIC STEP 7 in the TIA Portal
The SITOP UPS1600 can be used with STEP 7 in the TIA portal 12 with service pack 1
(SP1).
From SW version V2.1, STEP 7 can be used in the TIA Portal from Version 13.
After SITOP UPS1600 has been saved in the hardware catalog of STEP 7 in the TIA
Portal it can be integrated in the project, parameterized and diagnosed.
● SIMATIC STEP 7
SITOP UPS1600 can be used with STEP 7 from Version 5.4.
After SITOP UPS1600 has been integrated in the hardware catalog of STEP 7 it can be
integrated in projects, parameterized and diagnosed.
● SITOP UPS Manager
Using the SITOP UPS Manager , the SITOP UPS1600 can be parameterized. In addition,
the protection of individual computers or computer networks can be determined by
shutdown conditions after the failure of the supply voltage.
● Web server
The web server is used to monitor the SITOP UPS1600. It operates independently of the
UPS Manager and the PROFINET access.
Note
SIMATIC STEP 7 and the SITOP UPS Manager cannot simultaneously access the
SITOP UPS1600.
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
3
41