Troubleshooting - Siemens SITOP UPS1600 Manual

Troubleshooting

The help text provides further information about a pending alarm.
The Extended Error Type helps to interpret the alarms in self-programmed S7 function
blocks.
The maintenance specifies the severity of the alarm:
D = Diagnostics
MD = Maintenance Demanded
MR = Maintenance Required
Error Extended Maintenance
Type Error Type
256 1
256 2
256 3
256 4
256 5
256 6
256 7
256 8
256 9
256 10
256 11
256 12
256 13
256 14
256 15
256 16
256 17
256 18
256 19
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
Alarm Text
D Software corrupted
MR Wrong checksum
MR Parameter corrupt
MR Unknown parameter
MR Wrong message length
MR Wrong parameter
MR Command not accepted
MR Communication error: Wrong
length field
MR Wrong request
MR Cannot write to object
MR Object pending
MR Battery not available
MR EEPROM write error
MR Unknown alarm
MR Command outside range
MR Software update is being
performed.
MR No software update
MR Wrong battery number
MR Wrong address
Help Text
Software has been corrupted - attempt to update the
software.
Internal error: Communication disrupted
Attempting to write to an unknown or read-only
object.
Attempting to set a parameter that is not known by
DC UPS.
Internal error: Communication disrupted
Parameter value lies outside the valid range.
An incorrect command was sent to the DC UPS
Syntax error in command
Error in sent message: Unknown request sent.
Attempting to write a parameter that is "read-only"
DC UPS cannot provide data for the requested
object.
Attempting to access a battery that is not available.
Either the battery with the requested number was
never connected or communication with this battery
was interrupted.
Saving DC UPS parameters failed. Device is defec-
tive.
Internal error: Wrong parameter at execution of test
command.
An incorrect command was sent to the DC-UPS.
The command sent cannot be executed as long as
the program is running.
Cannot execute the sent command because no
software update has been started.
Attempting to retrieve data about a battery which
does not exist or is not connected.
Wrong Flash address in software update - software
update file is corrupt.
4
135