Reading And Writing Data Sets - Siemens SITOP UPS1600 Manual

Slot
3.7.2

Reading and writing data sets

An overview of all data sets, which are communicated between the SITOP UPS1600 and the
PROFINET IO-Controller is provided in the following table. Here, a distinction is made
between the following data sets:
● Reading data sets: Data which is sent from the SITOP UPS1600 to the
PROFINET IO-Controller.
● Writing data sets: Data which is sent from the PROFINET IO-Controller to the
SITOP UPS1600.
Index Slot Subslot Data set
0x0001 0 1
0x0002 0 1
0x0003 0 1
0x0004 0 1
0x0005 0 1
0x0006 0 1
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
Subslot Data
Battery change
recommended
New alarms pending
Battery charge level
Battery connection
maintenance
from V2.1
Type
Buffering parameters Reading /
writing
Battery parameters Reading /
writing
Charging parameters Reading /
writing
Reset parameters Reading /
writing
Battery information Reading
parameters
Device information Reading
Parameters
Engineering and remote access
Description
Battery replacement recommend-
ed: The battery capacity is not
sufficient for the defined buffer
time:
0: no
•
255: yes
•
New alarms pending:
0: no
•
255: yes
•
Battery charge level in %:
0-100: 0-100%
•
255: unknown battery
•
Connection to the battery inter-
rupted: Check the connection and
fuse:
0: no maintenance required
•
255: maintenance required
•
Description
Buffer parameters.
Parameters of the connected battery
modules.
Charge parameters of the connected
battery modules.
Reset parameters.
Information about the connected battery
modules SITOP UPS1100. This infor-
mation is available via the link "Energy
Storage".
Information about the SITOP UPS1600. 148 bytes
3.7 Cyclic and acyclic data
Data size
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Data size
14 bytes
5 bytes
4 bytes
1 byte
1024 bytes
123