3.3.5
Assigning the SITOP UPS1600 to a controller
To be able to use the SITOP UPS1600 you must assign an IO controller as IO device.
1. Click in the network view on the blue lettering "Not assigned" at the left next to the symbol
of the SITOP UPS1600.
A menu opens with the available controllers.
2. Select a controller in the menu.
3. Select the connection between the controller and SITOP UPS1600.
4. Make the required settings in the "Network data".
5. Double-click on SITOP UPS1600 to display it in the device view.
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
Engineering and remote access
3.3 SIMATIC STEP 7 in the TIA Portal
47