Connections And Terminal Designation; Sitop Ups1600; Power Terminals - Siemens SITOP UPS1600 Manual

2.2

Connections and terminal designation

2.2.1

SITOP UPS1600

2.2.1.1

Power terminals

The input terminals
output terminals
Cables must be used that are suitable for at least 90° C (only when UL508 must be complied
with).
The UPS1100 battery modules are connected via BAT
(see also Chapter Installation (Page 149))
Connections and terminal designations (see Image 2-1 SITOP UPS1600 design (example 6EP4136-
3AB00-2AY0) (Page 15))
①
②
③
④
⑤
⑥
Image 2-3
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
①
can be used to establish the connection to the supply voltage. The
②
are used to connect to the supplied loads.
DC input IN+, IN-
DC output OUT+, OUT-
BAT+, BAT-
Signal connector
PROFINET (Ethernet) connection
USB connection
Terminal data SITOP UPS1600 10 A, 20 A
Description, device design, dimension drawing
2.2 Connections and terminal designation
③
.
One screw terminal each
One screw terminal each
One screw terminal each
Connector with 14 screw terminals
RJ45 plug-in contact (only for ...-2AY0)
USB-B plug-in contact (only for...-1AY0)
17