Labconco Purifier Logic+ 30132 Technical Manual And Specifications page 140

Section 5 – Reconfiguring the Unit for Operation
with a Canopy Connection
Note: After canopy installation, you MUST reconfigure the Logic+ to have a
canopy.
Menu
1. Press the
2. Press the button until the
▼
(it will turn yellow).
OK/Mute
3. Press
4. Press the button until the
▼
highlighted (it will turn white).
OK/Mute
5. Press
6. You will see a
about to alter the BSC's settings.
OK/Mute
7. Press
8. When requested for the password press
Timer Timer
,
140
button.
Services
to enter the Services menu screen.
Configuration
to alter the configuration.
warning screen
alerting you that you are
to input the password.
OK/Mute
then .
Product Service 1-800-522-7658
option is highlighted
option is
Light UV light
, ,
MAIN MENU
TM
1. MyLogic
2. Settings
3. Service
 
or to choose,
OK to select, MENU to escape
Service
Current Settings
Restore Default
Diagnostics
Calibration

Configuration
 
or to choose,
OK to select, MENU to return
Configuration
ATTENTION!
The following screens are used
to alter the operation of the
Logic. They should only be used
by a qualified certifier as part
of the certification process.
OK to proceed, MENU to return
Configuration
PASSWORD: