Startup Tone; Security Lock; Rs-232 Output - Labconco Purifier Logic+ 30132 Technical Manual And Specifications

Startup tone

Using the and buttons on the touchpad, highlight the
▲ ▼
Startup Tone
option-it will turn white when selected, and
OK
then press . Using the
touchpad, highlight either
When turned on, an audible beep will sound during the
first 90 seconds of blower operation to caution the user
that the unit is not yet ready for use.

Security Lock

Note: The Security Lock feature "locks" the keypad to prevent unauthorized use of the
cabinet. The security lock is unlocked by holding the
The lock deactivates after cabinet is unlocked.
From the Settings menu screen, use the
on the touchpad to highlight the
turn white when selected. Press
Security Lock screen. Using the
touchpad, highlight either
white when selected, press
return to the first Settings screen.
RS-232 Output Rate
Note: This selection will only work if the optional EN/RS-232 board is installed.
This menu option selects the rate that the RS-232 board outputs data. Data can be
output at a rate of once per second, once every 10 seconds, once every 30 seconds, or
once per minute.
From the Settings menu screen, use the
on the touchpad to highlight the
white when selected. Press
232 output screen. Using the
touchpad, highlight either the data output rate preferred.
It will turn white when selected, and then press
screen will then return to the first Settings screen.
and buttons on the
▲ ▼
Turned on Turned off
or
and
▲
Security Lock
OK/MUTE
to enter the
and buttons on the
▲ ▼
turned on turned off
or
OK/Mute
. The screen will then
and
▲

RS-232 output

OK/MUTE
to enter the RS-
and buttons on the
▲ ▼
Product Service 1-800-522-7658
option.
button for at least 5 seconds.
▼
buttons
▼
option-it will
The Security Lock Is:
(Hold the
-it will turn
seconds to unlock the Logic)
 
or
OK to select, MENU to return
buttons
▼
-it will turn
OK
. The
Security Lock

turned on
turned off
button for more than 5

to choose,
67