Circuit Breaker - Xerox DocuColor 5252 Operator's Manual

O v e r v ie w

Circuit Breaker

3- 8
The digital press is equipped with an additional safety circuit
breaker. This device will trip if there is an electrical overload.
In the case of a building power outage, the digital press should be
powered on as soon as possible after the power is restored, and a
print should be made to ensure that no damage to the digital press
has occurred.
If power to the digital press fails to return, do the following:
1
Locate the circuit breaker on the back of the digital press on the
electrical module next to the toner waste bottle.
2
If the device has been tripped, the switch will be in the Off position
(down). Flip the switch up to the ON position.
Note: If the Circuit Breaker trips again, or if power is not restored
by the above procedure, call your Xerox service representative.
Ecology Module
Circuit Breaker
Figure 3-5
D oc u Co l or 5 25 2 O pe r a to r M a nu a l