Checking The Circuit Breaker - Xerox 6204 User Manual

Checking the Circuit Breaker

The circuit breaker opens automatically and removes input power from the machine if a short circuit or
overcurrent condition occurs.
When the circuit breaker switch is in the up
[ ] position, input power is supplied to the machine. If the machine will not be used for an extended
|
period, the printer and the controller may be powered down as described in the section on System
Power Off.
Check the Circuit Breaker once a month for correct operation. If you notice any unusual conditions,
contact your Xerox Customer Support Center.
The procedure for checking the Circuit Breaker is as follows:
1. Perform steps 1 through 3 of the System Power Off Procedure.
2. Press the TEST button while the circuit breaker switch is in the on [
turns off, it is operating correctly.
Test
Button
3. Reset the circuit breaker switch and perform the System Power On Procedure.
Downloaded From ManualsPrinter.com Manuals
On
Product Overview
] position. If the circuit breaker
|
Xerox 6204 Wide Format Solution
Printer User Guide
2-37