Xerox DocuColor 5252 Operator's Manual page 289

Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
4
Slide the Document Guide away from the stack of documents.
5
Raise the DADF and remove any documents from the Document
Glass.
6
Remove any paper that is on the DADF belt.
7
Close the DADF.
8
Check the documents for damage, creases, and/or folds before
reloading them into the Document Feeder Tray.
Note: If a document is damaged, you may have to use Interrupt
mode to make a copy from the Document Glass. You can then
return to the original job and use the copy instead of the damaged
document in the stack of documents you are copying.
9
Check the message on the screen to ensure that all jams are
cleared.
10
Reload the stack of documents into the Duplex Automatic
Document Feeder according to the instructions on the Touch
Screen. Reposition the document guide.
11
Press the Start button to restart your copy job.
P r o b l em s o l vi n g
7-13