Border Erase - Xerox DocuColor 5252 Operator's Manual

S c an n er
5- 5 8

Border Erase

The Border Erase feature makes it possible to specify the size of
border to create on all four sides of a print. You can erase the
border in 1 mm increments from a minimum of 0 mm up to a
maximum of 50 mm.
Border Erase and Edge Erase work independently of each other.
The default value for Border Erase is 2 MM. and may be changed
in Tools Mode. Refer to the System Administration Guide for
instructions (see page 2-74).
Figure 5-33
D oc u Co l or 5 25 2 O pe r a to r M a nu a l