Jam Clearance; Clear Bypass Area Jam - Xerox DocuColor 5252 Operator's Manual

A c c es s o r i es

Jam clearance

6- 2 8
A paper jam in the EHCS will be indicated by a message on the
digital press Touch Screen. Follow the instructions displayed. The
image on the EHCS Control Panel will flash showing the area
where the jam is located.

Clear Bypass area jam

Perform the following steps to clear the EHCS jam in the Bypass
area and resume printing.
1
Lift the EHCS Top Cover.
2
Lift the green handle, or handles, indicated on the Touch Screen
and remove all paper in the Bypass area. Remove paper only from
the areas indicated.
3
Close each green handle.
4
Close the EHCS Top Cover.
5
If the Touch Screen indicates there is a jam in the digital press,
follow the instructions on the screen to remove any paper in the
area indicates. Refer to the Jam Clearance section in the Problem
Solving chapter in this manual.
6
Follow the instructions displayed on the digital press Touch
Screen to resume printing.
Figure 6-21
D oc u Co l or 5 25 2 O pe r a to r M a nu a l