Xerox DocuColor 5252 Operator's Manual page 300

P r ob l em s ol v i n g
7- 2 4
5
Reposition green handle 4a.
6
The Fuser area is on the right hand side of the Paper Transport.
Lift handle 4c on the right hand side and lay the Inverter Transport
back.
7
Lift handle 4d and clear all jammed paper. Rotate knob 4e
counterclockwise to clear any immovable paper.
Note: Occasionally a sheet of paper wraps around the heat roll.
(The heat roll is visible when handle 4d is up.) DO NOT attempt to
remove this sheet of paper because the stripper fingers may be
damaged if you attempt this procedure. Call your Xerox service
representative to remove this piece of paper.
8
Reposition green handle 4d and close the Inverter Transport 4c.
Ensure the magnets are in place front and back.
9
Slowly push in the Paper Transport until it stops. Ensure that the
green handle is seated properly.
10
Close the Right and Left Front Doors.
11
Follow the instructions on the Touch Screen to restart your print
job.
D oc u Co l or 5 25 2 O pe r a to r M a nu a l