Ready Indicator does
not illuminate
Poor Stacking
Paper Jams:
Elevator does not go
up.
Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
No power
•
•
•
Mixed sizes of paper
Run separate jobs and empty stacker.
High paper curl
•
•
•
8 1/2 x 11 inch, 8 1/2
•
x 14 inch, A4 paper
sizes
Mechanical
•
obstruction
•
•
Lower paper path
Deselect offset or restart job.
High paper curl
•
•
•
•
Handle not in correct
•
position.
Check the power cord connected to the power
source.
Check that the GFI circuit breaker is not tripped
(rear cover).
Check that the main switch is on.
Adjust digital press decurler.
Flip paper in digital press paper tray(s).
Rotate paper in the digital press paper tray(s).
Check that paper in the digital press is loaded
short edge feed (SEF).
Check for obstruction in the stacker paper path.
Ensure that all transports and baffles are properly
seated.
Ensure that the cart is properly seated.
Adjust digital press decurler.
Flip paper over in the paper tray being used.
Rotate the paper in the paper tray being used.
Switch to heavier paper.
Open the front door and position the handle
correctly.
A ccess ories
6-15