Paper Guidelines - Xerox DocuColor 5252 Operator's Manual

Paper Guidelines

Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
For the best results, remember the following:
• Do not load paper or other materials above the MAX line.
• Do not use wrinkled, torn, curled, or folded paper.
• Use the recommended paper sizes and weights.
• Do not mix sizes or weights of paper in a paper tray.
• Ensure that the tray indicator LEDs are set for the correct
weight range.
• Follow the Recommended Materials List suggestions found at:
www.xerox.com
Copy paper is fed into the digital press in one of two positions.
One position is called long edge feed (LEF). Long edge refers to
the long edge of your copy paper. When you see LEF, position
your copy paper so the long edge is fed first. The other position is
called short edge feed (SEF). Short edge refers to the short edge
of your copy paper. When you see SEF, position your copy paper
so the short edge is fed first.
Note: It is imperative that you load paper with the paper guides
adjusted properly. If the paper is NOT loaded properly, it will skew
and jams will occur.
P ap e r an d P a pe r Tr a y s
4-5