Top Tray Mode; Unloading The High Capacity Stacker - Xerox DocuColor 5252 Operator's Manual

.

Unloading the High Capacity Stacker

Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l

Top Tray Mode

The High Capacity Stacker diverts sheets that are too small or too
large to be stacked to the Top Tray. Any sheets that need to be
purged after a paper jam are also sent to the Top Tray.
Note: Only use the Top Tray when printing labels.
When the High Capacity Stacker is full, or you want to retrieve a
job that has been completed, the operator may unload the stacker
by performing the following steps.
1
Press the Table Down Switch.
2
Wait until the elevator stops and the Please Wait indicator is OFF.
The Ready To Open indicator illuminates.
Figure 6-8
A ccess ories
6-9