Basic Scanning Steps - Xerox DocuColor 5252 Operator's Manual

S c an n er

Basic Scanning Steps

5- 2
If the DADF belt is dirty and the original is a thin or transparent
document, background may appear on the copy. This may also
occur when copies are made using the Document Glass. Place a
white sheet of paper of the same size on top of the document
being copied to eliminate background until the belt is cleaned.
Use the following steps for one-sided copies. Refer to the Basic
Features section for two-sided copies.
1
Touch the Basic Features tab.
2
Press the Clear All button to clear any previous programming.
3
Lift the DADF and place the original face down on the Document
Glass and close the DADF. Do not press down on the DADF with
excessive force when scanning thick originals such as books.
D oc u Co l or 5 25 2 O pe r a to r M a nu a l