Checking The Circuit Breaker - Xerox 6204 Wide Format Solution User Manual

Checking the Circuit Breaker

The circuit breaker opens automatically and removes input power from the machine if a short circuit or
overcurrent condition occurs.
When the circuit breaker switch is in the up [
machine will not be used for an extended period, the printer and the controller may be powered down
as described in the System Power Off Procedure.
Check the Circuit Breaker once a month for correct operation. If you notice any unusual conditions,
contact your Xerox Customer Support Center.
The procedure for checking the Circuit Breaker is as follows:
1. Perform steps 1 through 3 of the System Power Off Procedure.
2. Press the TEST button while the circuit breaker switch is in the on [
turns off, it is operating correctly.
Test
Button
3. Reset the circuit breaker switch and perform the System Power On Procedure.
On
] position, input power is supplied to the machine. If the
|
] position. If the circuit breaker
|
Xerox 6204 Wide Format Solution
User Guide
Product Overview
2-39