Xerox DocuColor 5252 Operator's Manual page 257

Fault Code
212 302 Top Cover open
212 540 Stacker tray full
212 541 Stacker tray position
212 542 No Stacker Cart
212 544 Door open
Ready Indicator No power
does not illuminate
Poor Stacking Mixed sizes of paper
High paper curl
Mechanical
obstruction
Paper Jams: Lower paper path
High paper curl
Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
Cause
1. Open Top Cover
2. Close the Top Cover
If the 212-302 Fault Code does not clear, ensure the Top
Cover is firmly closed.
Empty the Stacker Tray.
Press the Unload button. The Wait light blinks until the
Stacker Tray has reached the down position.
When the Stacker Tray has reached the down position, open
the front door.
Remove the Stacker Cart.
Remove all stacked paper.
Position the Stacker Cart securely into the EHCS.
Close the front door.
Open the front door.
Remove the Stacker Cart from the EHCS.
Position the Stacker Cart securely into the EHCS.
Close the front door
Close the door
• Check the power cord connected to the power source.
• Check that the GFI circuit breaker is not tripped (rear
cover).
• Check that the main switch is on.
Run separate jobs and empty stacker.
• Adjust digital press decurler.
• Flip paper in digital press paper tray(s).
• Rotate paper in the digital press paper tray(s).
• Check for obstruction in the stacker paper path.
• Ensure that all transports and baffles are properly seated.
• Ensure that the cart is properly seated.
Deselect offset or restart job.
• Adjust digital press decurler.
• Flip paper over in the paper tray being used.
• Rotate the paper in the paper tray being used.
• Switch to heavier paper.
A ccess ories
Solution
6-31