About The Circuit Breaker - Xerox 4110 Getting Started

1. O ve r v i ew
Power off

About the circuit breaker

1- 1 0
Perform the following to power off the machine:
1. Before switching off the power ensure that all print jobs have
completely finished. Furthermore, ensure that the <Online>
indicator is not lit.
CAUTION: Switching off the power before print jobs are
complete loses any data that is being processed.
CAUTION: Never switch off the power while data is being
received and/or jobs are being printed.
2. Press the power switch to the Off position [
CAUTION: The power off process continues internally after the
power switch is turned off. Therefore, do not immediately unplug
the power cord from the power outlet.
NOTE: If you have switched off the power, wait ten seconds
before switching on the power again.
This product is equipped with a circuit breaker. The circuit breaker
is normally set to the On ("l") position as shown in the following
figure.
If power to the machine is interrupted, the circuit breaker trips and
the switch is set to the Off ("O") position.
NOTE: If the breaker is in the Off ("O") position, contact your
Customer Support Center as there might be some unusual
conditions.
X er ox 4 59 0 E P S / 4110 E P S G e tt i ng Sta r te d
].