Disconnect Device; Laser Safety - Xerox DocuColor 5252 Operator's Manual

In tro d uc t i on

Disconnect device

Laser safety

1- 4
The power cable is the disconnect device for this equipment. It is
attached to the back of the machine as a plug-in device. To
remove all electrical power from the machine, disconnect the
power cable from the electrical outlet.
This product complies with safety standards and is certified as a
Class I Laser product under the US Department of Health and
Human Services (DHSS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of
1968. This product does not emit hazardous laser radiation.
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous exposure to laser light.
Since radiation emitted inside this product is completely confined
within the protective housing and external covers, the laser beam
cannot escape from the machine during any phase of the user
operation.
The Center for Devices and Radiological Health (CRDH) of the US
Food and Drug Administration implemented regulations for laser
products on August 1, 1976. These regulations apply to laser
products marketed in the United States. The label on the machine
indicates compliance with CDRH regulations and must be
attached to laser products marketed in the United States.
This product contains laser warning labels. These labels are
intended for use by XEROX Service Representatives and are
placed on or near panels or shields that require special tools for
removal. Do not remove any of these panels. There are no
operator serviceable areas inside these covers
D oc u Co l or 5 25 2 O pe r a to r M a nu a l