Xerox DocuColor 5252 Operator's Manual page 51

Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
Part
Upper Door The Upper Door Transport Module paper path
Transport Module transports paper from the Paper Trays to the
Transport Module.
Transport Module The Transport Module carries the paper from the
paper trays to the upper paper path of the digital
press. It also routes the paper from the lower
paper path of the digital press to the upper paper
path of the digital press when duplexing.
Scanner The Scanner contains an Duplex Automatic
Document Feeder (DADF) which automatically
feeds originals onto the document glass. These
originals are scanned as Simplex or Duplex. The
DADF has a capacity of up to 50 same size or
mixed size, 16 to 32 pound (64 to 128 g/m
documents.
Document Glass An original can be placed on the Document Glass
to scan for copying.
ON/OFF Press the Power Switch to the On position to
switch the digital press on.
A screen message advises of a short wait while
the Fuser warms up and the digital press runs a
system check. You can program the digital press
ON
for a job during this time and the printing process
will start automatically when the digital press is
ready.
Press the Power Switch to the Off position to
switch the digital press off.
OFF
Allow the digital press to remain off for a
minimum of 20 seconds before switching the
power on again.
Touch Screen Allows selections to be made by simply touching
the selections on the screen.
Overview
Description
2
)
3-3