Build Job - Xerox DocuColor 5252 Operator's Manual

S c an n er
5- 11 2

Build Job

Build Job allows you to program, scan, and store individual job
segments of a large or complex copy job, and then print all the
segments as one complete job. This feature is useful when you
have copy jobs containing more than fifty originals. Segments are
programmed as if they were ordinary, independent jobs, and
scanning is initiated for each segment by pressing the Start
button.
When you press the Save button, the Build Job screen closes, and
control reverts to the Basic Features screen. A new button, Build
Job Controls, appears at the top right of all primary screens. Press
this button to access features that are available after a segment is
saved.
Output must be Collated, and a specific Paper Tray must be
selected on the Basic Features screen for the Build Job button to
appear on the Job Assembly screen. The Build Job feature cannot
be used in combination with the Inserts, Covers, or Poster options.
1
Touch the Build Job button on the Job Assembly screen. The
Build Job screen is displayed.
Figure 5-79
D oc u Co l or 5 25 2 O pe r a to r M a nu a l