Xerox DocuColor 5252 Operator's Manual page 199

Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
If Front and Back Covers has been selected, you must indicate if
there is an image on either cover. Touch None for no image, Front
Only if there is an image on the front side of the Front Cover,
Back Only if there is an image on the back side of the Back
Cover, or Front & Back for an image on the exterior side of both
covers.
4
If Front Cover Only, Back Cover Only, or Front and Back
Covers have been selected, you must indicate the tray from which
the cover stock is fed.
5
Touch the Save button.
6
Continue selecting options for your job.
7
When you are finished selecting options, press the Start button.
Figure 5-61
Scanner
5-91