Control Panel - Xerox DocuColor 5252 Operator's Manual

8
9
Name
1 Ready light The Ready light blinks during initialization and is constant when the EHCS is in use
or in standby mode.
2 Sample set Press to have the EHCS deliver the next collated set to the top tray.
button
3 Unload Press once to lower the Stacker Tray and unlock the front door. If pressed while
button running a job, all sheets in the paper path are delivered before the Stacker Tray
starts to lower.
4 Unload light Illuminates when the Stacker Tray has reached the down position and the front door
can be opened.
5 Wait light Blinks when the Stacker Tray is moving up or down.
6 Fault code Refer to the fault code table later in this section.
display
7 Top tray jam Blinks when there is a jam.
area
8 Bypass jam Blinks when there is a jam.
area
9 Stacker tray Blinks when there is a jam or the door is open.
jam area
Keypad Used by the service representative for diagnostics (not shown). The keypad is
located on the front right of the control panel.
Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l

Control Panel

7
1
Figure 6-13
2
3
Function
A ccess ories
6
4
5
6-19