Auto Image Rotation; White Border Edges On Copies - Xerox DocuColor 5252 Operator's Manual

Auto Image Rotation

White Border Edges on Copies

Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
The digital press offers an automatic rotation feature for 8.5 x 11
inch, or A4, original documents input from both the Duplex
Automatic Document Feeder and the Document Glass. This
feature must be activated through Tools Mode. Refer to the
System Administration Guide for the procedure (see page 2-62).
If the scanner detects that the orientation of the original document
is different from the orientation of the paper tray selected, an
orientation mismatch message appears and asks if you want to
rotate the image. Select "Yes" to rotate the image.
If you do not want to rotate the image, select "No." Use the
Reduce/Enlarge feature, on the Basic Features tab, to fit the
image onto the paper orientation selected.
All copies made on the digital press have white border edges on
four sides of the output. There is a factory setting which removes 2
MM. from all four edges of the scanned original. This factory
setting cannot be altered.
If the white border edges result in image loss on your copies,
select the Auto% option in the Reduce/Enlarge feature to minimize
the image loss. The Auto% option automatically reduces or
enlarges the copy, based on the size and orientation of the
document and the paper tray selected. This option is applied only
to standard size documents.
You may also use the Auto Center feature to ensure the original is
centered on your output. For more information on Auto Center,
refer to the Edge Erase feature in the Added Features section.
Scanner
5-11