High Capacity Stacker maintenance
Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
5
If the Touch Screen indicates there is a jam in the digital press,
follow the instructions on the screen to remove any paper in the
area indicates. Refer to the Jam Clearance section in the Problem
Solving chapter in this manual.
6
Follow the instructions displayed on the digital press Touch
Screen to resume printing.
Cleaning the High Capacity Stacker
Do not clean any area inside the High Capacity Stacker. If the
covers or Front Door require cleaning, dampen a paper towel or
soft, clean cloth with a liquid, nonabrasive glass cleaner or water.
To avoid damage to the High Capacity Stacker, do not pour or
spray the cleaner or water directly onto the High Capacity Stacker.
Always apply the liquid to the cloth first.
Do not use any other cleaners or solvents on the High Capacity
Stacker or they may interact with the paint on the covers,
eventually causing the paint to peel.
A ccess ories
6-13