Edge Erase For Drilled Paper - Xerox DocuColor 5252 Operator's Manual

S c an n er
5- 5 6

Edge Erase for Drilled Paper

Edge Erase can be used to erase the black holes created when
copying an original that is printed on drilled paper. This can be
used for 1-Sided and 2-Sided scan to print jobs from the Duplex
Automatic Document Feeder (DADF).
Using the Edge Erase feature for this purpose may cause some
image loss on the opposite side of the document.
Use the following procedure to use Edge Erase to erase black
holes on output:
1
Choose the appropriate paper tray in the Paper Supply column on
the Basic Features screen.
2
Select Original Input on the Added Features screen. Select
Manual Input and Custom Size.
3
Make sure that the Y dimension is set to equal the length of the
original being copied.
4
Change the X dimension to a size equal to the width of the original
minus the edge amount for the holes.
For example, for an 8.5"x11" original, input 8" for the X dimension.
5
Press the Save button.
D oc u Co l or 5 25 2 O pe r a to r M a nu a l