Cleaning the touch screen
Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
9.
Maintenance
This chapter describes the consumable supply replenishment
procedures necessary for keeping your digital press operating
reliably.
For troubleshooting problems, refer to the Problem Solving
Section of this manual. Problems that cannot be solved need to be
referred to your Xerox service representative. Use the procedure
in this section when it becomes necessary to request a service
call.
The procedure for ordering supplies and a list of the supplies you
should keep on-hand are also included in this chapter.
Clean the Touch Screen during the digital press warm-up cycle at
the start of each day. Remove all dust and fingerprints by wiping
the Touch Screen with a clean, lint-free cloth.
Caution:
To avoid damage, do not use any Xerox cleaner, water,
or commercial cleaner on the Touch Screen.
19
9-1