Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
1
Open the Waste Dry Ink/Toner door at the back of the Exit Module.
Refer to the following figure.
2
Grasp the handle of the full bottle and pull it out of the machine.
3
Remove the cap from the cap holder on the side of the full bottle
and press the cap securely into the open hole on the top of the full
bottle.
4
Dispose of the full bottle according to your local regulations.
5
Remove an empty bottle from the carton and insert it into the
machine. Ensure that the hole on the top of the bottle is open.
6
Close the Waste Dry Ink/Toner Bottle door.
Figure 9-20
Open hole
Cap in
holder
Figure 9-21
Mai ntenance
9-11