Message List - Xerox 6030 User Manual

Message List

This section explains messages that may be displayed during printing using the
ftp command.
Can't build data connection
Status: Cannot establish connection for data transfer.
Action: Wait a few moments and try again.
Can't create control file, please try later
Status: Cannot create a control file using the STOR command.
Action: Wait a few moments and try again.
Can't create status file, please try later
Status: Cannot create a job file using the LJ command.
Action: Wait a few moments and try again.
Can't open passive connection
Status: Cannot create a socket in passive mode.
Action: Wait a few moments and try again.
Cannot create file "xx" or permission problem
Status: Cannot open a parameter file for creating the specified file.
Action: Wait a few moments and try again.
Command "xx" not understood
Status: Command (XX) received not supported.
Action: Enter the correct command.
Control connection read error
Status: A control connection error occurred in the FTP command wait status.
Therefore, the connection was disconnected.
Action: For another transfer, establish the connection again.
6.4 Printing Using the ftp Command (6030/6050 only) 235