Xerox 6030 User Manual page 146

Output image size
Settings
The settings for this function are as follows.
Auto Mapping
Size
(fixed)
Output
Paper
118
A3
Rotated 90 degrees
Menu Item
Sets whether the automatic mapping functions is to be
enabled or not.
The output paper size that best matches the output image
size will be determined automatically when this function is
set to [Enable]. The values specified in paper mapping
will be invalidated.
The value entered here is used as the input size when
[Output] has been specified.
The value entered here is used as the output size when
[Media Type] has been specified.
The paper size displayed will differ in accordance with the
[Input size] parameter set for the Media series.
Sets the size of the output image in relation to the input
size (size mapping).
The paper size selected will differ in accordance with the
[Output size] parameter set for the Media series.
Sets the size of the paper that is to be actually output in
relation to the output size when automatic mapping has
been set to [NO] (media mapping).
There are cases where the input image will be rotated for
output purposes depending on the paper size specified
here.
The paper size selected will differ in accordance with the
[Media size] parameter set for the Media series.
Refer to the section on "Media Series" for further details on paper groups.
Chapter 4 Logical Printer Setup and Operation (6030/6050 only)
A3 Output on the A3
roll media
Paper
A3 Output on the A2
roll media
Description