Ps/Pdf Option - Xerox 6030 User Manual

PS/PDF Option

The available selections set up the default media size, roll, and DMS for PS/PDF
data.
Settings
The settings for this function are as follows.
Default Media
Size
Default Media
Source
Default DMS
Plot Area
164
Menu Item
If media size information is not included in the print data, and
no media is loaded in any trays, the page size of the data will
be the selected media size.
The default setting is [ISO_A0].
If media size information is not included in the print data, the
page size of the data will be the selected media size.
The default setting is [ROLL 1].
If a DMS is not specified in the print data, the page size of
the data will be the media size specified on the logical
printer. The available settings are [ENABLE] and [DISABLE].
The default setting is [DISABLE].
This selection sets up the printable area.
The default setting is [Normal].
[Normal] Adds 4 mm margins to the top, bottom, left, and
right sides of the media. Print data is placed inside the
margins.
[Extend] No margins are added. Images will be printed to the
edge of the page.
Chapter 4 Logical Printer Setup and Operation (6030/6050 only)
Description