Xerox 6030 User Manual page 43

Administrator Mode
To enter the administrator mode, log on to Print Services on Web, select
the [Administrator page] button, and then enter the administrator login
and password when prompted to do so. The administrator page displays
two additional tabs, [Properties] and [Tools], and expands the capabilities
of the [Job and Log], [Status], and [Print Setup] tabs.
The selections on the Administrator page tabs enable the administrator to
perform the tasks listed below.
[Job and Log] tab
[Status tab]
[Print Setup] tab
[Properties] tab
[Tools] tab
1.6 Print Services on Web Overview (6030/6050)
• Check the status of jobs in the print queue.
• View and print the job log and the error log.
• Cancel a print job.
• Change the priority of a print job.
• Check the status of the Printer or Copier/Printer.
• Stop and start print services (job reception and
printing).
• Stop and start job reception from client computers.
• Stop and resume print jobs.
• Set up new logical printers for each of the allowable
data formats (HP-GL, TIFF, CALS, VERSATEC, PS/
PDF).
• Edit the settings of existing logical printers.
• View and change the machine configuration.
• View and change communications configurations.
• Manage ftp users.
• Print a test pattern to verify machine (printer) operation.
• Print a Diagnostic Report.
15